24/7 Emergency Fire Damage Removal in Utah, UT
The fire is out, the trucks have left, and now you are standing in the driveway wondering what happens next. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of Utah, UT. We answer around the clock, and dispatch starts while you are still on the phone.
- A free referral line that answers 24/7, holidays included
- Independent crews working in every part of Utah, UT
- Written, line-item estimates before any work begins
- Help lining up paperwork your insurance adjuster will ask for
One phone number for fire calls across Utah, UT
Unify Fire Solutions does not do restoration work. We run the dispatch desk that gets a qualified independent contractor headed your way.
Almost nobody has been through a house fire before, so the sequence of decisions is a mystery. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers field these questions every day, from every part of Utah, UT, and we can usually point you in the right direction in a few minutes.
When you call +1-833-336-1630, a live dispatcher asks a short set of questions: the property type, whether the fire department has released the scene, whether there is standing water from the hoses, and whether the roof or windows are open to the weather. Your answers tell us which independent crew in our network fits the job and how quickly the first visit needs to happen.
The contractors we connect you with are licensed and insured independent businesses based in or near your community. They own their equipment, employ their own crews, write their own estimates and answer for their own work. We handle the connection, so at 2 a.m. you are talking with a qualified local pro instead of scrolling through search results on your phone in the dark.
Calling costs nothing, and the line is staffed 24/7, including weekends and holidays. From a single-family home to a rented duplex, a condo unit or a storefront, the routing works the same way anywhere in Utah, UT.
It helps to have a few details ready: the property address, your insurer's name, a claim number if you have one, and the fire department's incident number. Don't worry if you have none of it yet. Lots of callers reach us from a neighbor's porch with only a phone, and the dispatcher will help you work out what to collect next.
What independent Fire Damage Removal crews in Utah, UT do
A fire leaves three separate problems behind: charred materials, smoke residue that spreads through the whole building, and the water used to knock the fire down. Here is how the independent contractors in our network approach each one.
Emergency mitigation and stabilization
Mitigation is the work of keeping the damage from spreading, and with fire it is a race against time. Soot is acidic. Within a few hours it starts to yellow plastics and vinyl, and within a couple of days it can etch glass, pit chrome fixtures and stain grout for good. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Next comes water: truck-mounted or portable extraction units pull standing water out of carpet and subfloors, and wet pad is usually cut out and bagged.
Once the structure is stable, crews set up air scrubbers with HEPA filtration to capture airborne soot, and they may place the work area under negative air pressure so particles don't drift into clean rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Boarding of windows, doors and openings in walls
- Roof tarping to keep rain off exposed framing
- Water extraction and tear-out of soaked materials
- HEPA air filtration and moisture mapping
Homes, condos and townhouses
A house fire rarely stays in one room, even when the flames did. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew starts by mapping how far the residue traveled, room by room, before anything gets wiped.
Dry soot from a fast, hot fire is powdery, so crews lift it with dry chemical sponges and HEPA vacuums. Wet, smeary smoke from a slow, smoldering fire is oily and needs alkaline cleaners and a lot more labor. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Every residue needs its own chemistry, and the wrong product can push the stain further into paint and wood.
Charred materials get removed down to sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. It is fair to ask the crew which studs will stay and which will go, and to have that written into the estimate.
- Residue mapping and spot tests before any cleaning
- Selective demolition of charred drywall, insulation and trim
- Blasting and sealing of smoke-stained framing
Businesses, rentals and multi-unit buildings
When the property is a business or a rental, the questions multiply. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex needs smoke contained before it migrates through shared attic space and ductwork.
Contractors who handle commercial work often phase the job so part of the space can keep operating. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. For a retail space, that might mean the sales floor reopens while the stockroom is still under containment.
Inventory is its own problem. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Ask the crew to photograph and list disposed inventory with quantities so your business interruption and property claims line up.
- Phased work plans that keep part of the space open
- Containment walls between damaged and occupied units
- Inventory disposal lists for the claim file
Multi-unit buildings add a building code question. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask the crew if those items are part of their estimate or will go to a separate trade.
For landlords and property managers: request a brief written status for each unit, livable or not, that you can forward to tenants and your carrier that day.
Contents, odor, HVAC and firefighting water
Ask any fire survivor and they mention the smell. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents crews pack out what can be saved, inventory each box, and clean it off site, using ultrasonic tanks for hard items and specialty laundering for fabric. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Deodorization comes after the cleaning, not as a substitute for it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone works well but the building has to be empty of people, pets and plants, so ask about it first.
If the HVAC system was running during the fire, the ductwork pulled smoke through every room it serves. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. It is reasonable to ask whether the contractor works to IICRC guidance, including S700 for fire and smoke damage and S500 for water damage.
- Contents pack-out with an itemized inventory
- Odor treatment by thermal fog, hydroxyl or ozone
- Inspection and cleaning of ducts, coil and air handler
The water from the hoses is what most people underestimate. A single engine can pour hundreds of gallons into a house in minutes, and that water finds its way into wall cavities, under cabinets and down through ceilings. Mixed with soot and ash, it is dirty water, so wet carpet, pad and insulation are usually removed rather than dried in place. Crews remove baseboards or drill small holes to ventilate wall cavities, then track readings until the framing returns to a normal dry level.
- Drying of wall cavities soaked by hose water
- Electronics sent to a specialist vendor
Just got the all-clear from the fire department?
Call the free line, and a dispatcher will talk you through the next hour while lining up an independent crew close by.
Call +1-833-336-1630What you can expect from a Unify Fire Solutions referral
Nobody can promise the cost of a fire job or the length of a rebuild. These are the things we can say plainly.
Written estimates up front
Before any work begins, the contractor should hand you a written estimate broken out line by line, so ask for it. Many crews in Utah, UT build estimates in the same software adjusters use, so the two documents can be compared side by side.
Dispatch at any hour
The phone is answered 24/7 and dispatch starts the moment you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Local crews across the state
The network reaches cities, suburbs and rural communities throughout Utah, UT. You are matched with a crew that works near you and knows how the local building office and utilities run.
Licensed, insured independent pros
Every referral goes to a licensed and insured independent contractor. Still, verify the license and the certificate of insurance yourself before signing, and ask whether the crew follows IICRC S700 guidance.
Another contractor if the first isn't right
If the first contractor isn't the right fit, for any reason, call back and we'll connect you with another one. It might be scheduling, a second estimate your adjuster asked for, or just a bad fit in personality. Any of those is a fine reason.
On bigger fire losses, a second estimate is normal, and plenty of adjusters prefer it. Make sure both estimates cover the same scope, line for line, so the comparison is fair.
Your statewide fire recovery decision guide
No two fires are alike, yet the sequence of decisions is remarkably similar anywhere in Utah, UT. Use this as a checklist while you wait for a crew.
- 1
Safety first, then the call
Don't go back in until the fire department says you can. Then call +1-833-336-1630. A dispatcher will ask about the scene, the water, and any open roof or windows, and will start looking for a crew right away.
- 2
Crew arrives and secures
The independent contractor walks the property with you, photographs everything, and boards or tarps any openings. Where water is pooled, extraction frequently begins on the very first visit.
- 3
Scope of work in writing
You receive a written estimate, line by line, with mitigation split out from rebuild work. You or the contractor share it with your adjuster, and nothing beyond emergency stabilization should start until you sign.
- 4
Clean-up, drying and odor work
Crews remove charred materials, dry the structure, clean soot from every affected surface, and treat odor. Moisture readings and photos are logged daily so the adjuster can see the progress.
- 5
Rebuild and final walkthrough
Permitted repair work comes next: framing, electrical, drywall, paint and floors. Before paying the final bill, walk through with the contractor and write down anything still unfinished.
The first hour, before any crew arrives: get everyone out and accounted for, including pets. Do not re-enter until the fire department releases the scene, and never switch breakers on or off yourself after a fire. Ask the firefighters for the incident number and write it down, because your insurer will need it. If it's safe from outside, shoot wide photos and video of every side of the building.
Fire department release and red-tagged properties
The fire department controls the property until it formally releases the scene. When investigators are still determining the cause, you could be kept out for several hours or, now and then, a few days.
After the release, a building official from your city or county may post a placard. Green usually means occupancy is allowed, yellow means restricted entry, and red means no one enters until an engineer or official evaluates it. Placard systems vary by jurisdiction across Utah, UT, so read the notice carefully and call the number printed on it.
A red tag doesn't stop mitigation from the outside. Contractors can still board up, tarp the roof and fence the site, and many will coordinate with a structural engineer to get the tag lifted.
Utility shutoffs after a fire
During the fire, crews often pull the electric meter and shut the gas. Once a utility has been shut off for a fire, the provider usually will not restore service until the system is inspected, and sometimes a licensed electrician or plumber must sign off first.
That means the restoration crew will usually show up with their own generators to run air scrubbers and dehumidifiers. Contact your power, gas and water companies directly, report the fire, and ask what they require before restoring service.
If water service is still live and a line ruptured in the heat, close the main shutoff. It is usually near the meter or where the line enters the house.
Working with your insurance adjuster
Report the loss to your insurer the same day and get a claim number. Most policies require you to take reasonable steps to prevent further damage, which is exactly what emergency mitigation is. You do not need to wait for the adjuster before boarding, tarping and drying, but keep every receipt.
Independent contractors across Utah, UT usually produce two separate invoices: one for mitigation (board-up, extraction, drying, soot cleanup) and one for restoration (rebuilding). Adjusters handle the two differently, so separating them keeps the claim moving. Ask for dated photos, daily moisture logs, and a contents inventory, and request copies of everything sent to the insurer.
If the home isn't livable, many policies include additional living expenses (sometimes called loss of use) for temporary housing, meals and similar costs. Limits vary from policy to policy, so ask your agent what applies and keep all receipts.
Building permits for fire repairs
Cleaning and mitigation usually don't need a permit. Structural repairs, rewiring, new framing, a new roof and HVAC replacement nearly always require one. Permits in Utah, UT are issued by local city or county building departments, so the forms, fees and inspection schedules vary from one place to the next.
A local contractor who knows the nearby office will usually pull the permit under their own license. Confirm the permit is posted and inspections are passed before anyone closes the walls. Your insurer may ask for the final inspection record before releasing the last payment.
Opening the walls of an older home can bring up new issues. When the house is old enough to have asbestos in ceiling texture, flooring or duct wrap, or lead paint, testing may be needed before tear-out. Repairs may also have to meet the current code rather than the code the house was built under, which some policies cover as ordinance or law coverage, so ask your agent.
Rentals: who handles what
In a rental, the building and the tenant's belongings are usually insured separately. Usually the owner's policy covers the building and fixtures, and the renter's policy covers the tenant's furniture, clothes and temporary housing.
Owners should put access, timelines and habitability decisions in writing for tenants. Tenants should photograph their own belongings before the pack-out and get a copy of the contractor's contents inventory. Landlord and tenant obligations after a fire are set by Utah, UT law and your lease, so check the lease and ask a local attorney or housing office if anything is unclear.
The landlord or the tenant can call us. In most cases the owner signs for the building work and the tenant handles the contents claim, and one crew can do both if everyone agrees.
Reopening a small business after a fire
For a business, every closed day costs money, so speed of mitigation matters even more. Ask your commercial carrier about business interruption coverage and track lost income starting on day one.
Restaurants, salons, medical offices and food retailers will likely need a health or fire inspection before reopening. Ask the contractor for a phased schedule and a written list of what must be finished before each inspection.
Before the computers are moved, make sure your sales system, payroll and customer records are backed up. If you lease the space, notify the landlord right away, since the lease normally says who pays for which repairs.
Why 24 to 72 hours is the window: soot continues to etch finishes, wet building materials begin to grow mold, and smoke odor sinks further into porous surfaces every day. Starting mitigation quickly is usually the single biggest factor in how much of your home can be cleaned rather than replaced.
Notes from people who called the line
Shared with permission, with last names shortened.
The dryer vent caught at about eleven at night. By the time the fire department cleared us, I couldn't think straight. The dispatcher asked me five or six simple questions and told me to get the incident number before the engine left. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I own two rental duplexes and one tenant had a kitchen fire. The best part was that the contractor split the mitigation bill from the rebuild estimate. My adjuster approved the first one within a week, and the tenant next door never had to move out because the crew sealed the shared wall and attic.
We rented our place and the fire started in the unit below us. I had no idea my renter's insurance covered a hotel until the dispatcher told me to ask my agent about it. The crew packed out our clothes and the kids' things and gave me a typed inventory, which made the claim a lot easier.
My restaurant went dark on a Friday after a grease fire. The contractor set up plastic walls so we could get the dining room cleaned and inspected while they kept working on the kitchen. They wrote out exactly what needed finishing before the health inspection, and we passed on the first try.
The first contractor I talked to couldn't begin for close to a week. I called back, said that wouldn't work, and the dispatcher connected me with a different crew who started the next day. No pushback and no runaround, which was exactly what I needed.
Fire damage questions from Utah, UT callers
How fast can a Fire Damage Removal technician arrive in Utah, UT?
Dispatch starts the moment you call, and the phone is answered 24/7. How soon a crew arrives depends on which independent contractors are available and how far they are from your property. In most of Utah, UT it is often the same day, and the dispatcher will tell you what to expect before you hang up.
Do you provide upfront pricing?
We don't set prices, since Unify Fire Solutions is a referral line and not the contractor. The independent contractor provides a written, line-item estimate before work starts, and you should ask for one before signing anything. Emergency board-up or extraction may start immediately to limit damage, so ask the crew to put those charges in writing as well.
What emergency services are available?
The crews we refer usually cover board-up, tarping, extraction of firefighting water, drying, soot removal, air scrubbing and deodorization. A lot of them also handle contents pack-out and storage, duct cleaning, and the rebuild after mitigation. Tell the dispatcher what you're seeing and we'll match you with a crew that does that work.
Do contractors in UT work directly with my insurance company?
Most independent crews in UT deal with adjusters every week. They document the damage with photos, moisture readings and a line-item estimate, and they can send that file to your adjuster with your permission. Keep in mind the policy is between you and your insurer, so you make the final decisions and should keep copies of everything.
Do I need a permit for fire damage repairs in Utah, UT?
Cleaning and mitigation usually don't, but structural, electrical, roofing and HVAC repairs almost always do. Your city or county building department issues permits in Utah, UT, and the rules differ from place to place. A local contractor will usually pull the permit and schedule inspections for you.
Can I stay in my house after a fire?
It depends on the fire department's release, any building placard, and whether utilities can be safely turned back on. Even after a minor fire, soot and odor can make the home unhealthy to sleep in, particularly for children, older adults and people with asthma. Ask your insurer whether your policy includes additional living expenses for temporary housing.
Should I call my insurance company or a contractor first?
Call both on the same day, in whatever order works. Nearly every policy expects you to stop additional damage, so boarding and water removal shouldn't wait on the adjuster. Write down the claim number, save all receipts, and pass the number to the contractor so their documents line up.
What should I throw away after a fire?
Throw out food, medicine and cosmetics that were exposed to heat, smoke or firefighting water. Photograph and list everything else before discarding it, and let the crew help sort what can be saved. Clothing, dishware and solid furniture that look ruined can often be cleaned.
Is it safe to clean up soot myself?
Wiping soot with a wet rag usually smears it deeper into paint and fabric, and some residue contains acids and fine particles you don't want to breathe. If you go inside to grab essentials, wear an N95 mask and gloves and don't run fans or the HVAC. Leave the cleaning to the crew, who will test the residue and choose the right chemistry.
Does Unify Fire Solutions serve every part of Utah, UT?
Our network reaches cities, suburbs and rural communities throughout Utah, UT. In remote areas the nearest crew may be farther away, so the dispatcher will be upfront about expected timing. Call +1-833-336-1630 with your address and we'll tell you who can get there.
Fire Damage Removal coverage throughout Utah, UT
One phone number reaches independent crews anywhere in Utah, UT, from dense metro neighborhoods to farmhouses at the end of a gravel road.
Around the larger metros, several contractors are often within reach, which lets the dispatcher match on a specialty like commercial kitchens or condo towers. Suburban crews see plenty of attached garage fires, dryer vent fires and kitchen fires in single-family houses. In rural parts of Utah, UT, the nearest crew may travel farther, and they often arrive with generators and trailers because utility restoration can take longer.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Common causes we hear about include kitchen fires, dryer vents, space heaters, electrical faults, candles, lightning strikes, grills, garage fires, furnace puff-backs and fire spreading from a neighbor's property. Whatever the cause, the first call is the same.
If you are out of state when it happens, say at a rental property or a parent's home, you can still call. The dispatcher can coordinate with a neighbor, a tenant or a property manager on site, and the contractor can send photos and the written estimate to you by email before anything beyond emergency stabilization begins.
