Statewide Emergency Fire Damage Cleanup in Utah, UT
The fire is out, the trucks have left, and now you are standing in the driveway wondering what happens next. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of Utah, UT. We answer around the clock, and dispatch starts while you are still on the phone.
- Free referral line answered 24/7, every day of the year
- Independent crews working in every part of Utah, UT
- Written, line-item estimates before any work begins
- Help lining up paperwork your insurance adjuster will ask for
One phone number for fire calls across Utah, UT
Unify Fire Solutions is not a restoration company. We are the dispatch desk that gets the right independent contractor moving toward your property.
Most people only deal with fire damage once in their lives, so nobody knows the order of operations. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers field these questions every day, from every part of Utah, UT, and we can usually point you in the right direction in a few minutes.
When you call +1-833-336-1630, a live dispatcher asks a short set of questions: the property type, whether the fire department has released the scene, whether there is standing water from the hoses, and whether the roof or windows are open to the weather. Those answers decide which independent crew in our network is the best match and how urgent the first visit is.
Every contractor we refer is a licensed and insured independent business that works locally. They own their equipment, employ their own crews, write their own estimates and answer for their own work. Our job is the connection: getting a qualified local pro on the phone with you at 2 a.m. instead of leaving you to scroll through search results on a cracked phone screen.
The line is free to call, and it stays open 24/7, weekends and holidays included. Whether the property is a single-family home, a rented duplex, a condo unit or a storefront, the routing process is the same anywhere in Utah, UT.
It helps to have a few details ready: the property address, your insurer's name, a claim number if you have one, and the fire department's incident number. Don't worry if you have none of it yet. Lots of callers reach us from a neighbor's porch with only a phone, and the dispatcher will help you work out what to collect next.
What independent Fire Damage Cleanup crews in Utah, UT do
Fire damage is really three problems at once: the burned materials, the smoke residue that travels everywhere, and the water firefighters used to put it out. Here is how the independent contractors in our network approach each one.
Emergency response and mitigation
Mitigation is the work of keeping the damage from spreading, and with fire it is a race against time. Soot is acidic. In a matter of hours it yellows plastics and vinyl, and after a day or two it can etch glass, pit chrome and permanently stain grout. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Then the water: extraction units pull standing water from carpet and subfloor, and soaked carpet pad is generally cut out and bagged.
Once the structure is stable, crews set up air scrubbers with HEPA filtration to capture airborne soot, and they may place the work area under negative air pressure so particles don't drift into clean rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Board-up of windows, doors and wall openings
- Tarps on the roof to keep weather off open framing
- Water extraction and tear-out of soaked materials
- HEPA air scrubbing plus moisture readings
Homes, condos and townhouses
A house fire rarely stays in one room, even when the flames did. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew first maps how far the residue spread, room by room, before anyone touches a surface.
Dry soot from a fast, hot fire is powdery and comes off with dry chemical sponges and HEPA vacuums. Wet, smeary smoke from a slow, smoldering fire is oily and needs alkaline cleaners and a lot more labor. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Every residue needs its own chemistry, and the wrong product can push the stain further into paint and wood.
Charred materials get removed down to sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. Ask the contractor to show you which studs they plan to keep and which they plan to replace, and to note it on the estimate.
- Soot mapping and surface testing before cleaning
- Targeted tear-out of burned drywall, insulation and trim
- Framing cleaned by blasting, then sealed
Commercial property, rentals and apartment buildings
With a business or a rental unit, the list of questions gets longer fast. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex has to stop smoke from moving through the shared attic and ducts.
Contractors who handle commercial work often phase the job so part of the space can keep operating. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. For a retail space, that might mean the sales floor reopens while the stockroom is still under containment.
Stock and inventory are a separate issue. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Ask the crew to photograph and list disposed inventory with quantities so your business interruption and property claims line up.
- Phased schedules so a portion of the business can reopen
- Containment between occupied and damaged units
- Itemized disposal records for the insurance file
Apartment and condo buildings bring building code into play. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask whether those items are in the estimate or will be handled by a separate contractor.
Landlords and property managers: ask the contractor for a short written status note on each unit, habitable or not, so you can send it to tenants and your insurer the same day.
Contents, odor, HVAC and firefighting water
Ask any fire survivor and they mention the smell. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents specialists pack out salvageable belongings, inventory them box by box, and clean them off site using ultrasonic tanks for hard goods and specialty laundering or dry cleaning for textiles. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Odor control happens after cleaning, never instead of it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone works well but the building has to be empty of people, pets and plants, so ask about it first.
An HVAC system that was running during the fire pushed smoke into every room on that system. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. Ask whether the contractor follows IICRC guidance, such as the S700 standard for fire and smoke and the S500 standard for the water side of the job.
- Contents pack-out with an itemized inventory
- Odor treatment by thermal fog, hydroxyl or ozone
- Air handler, coil and duct inspection and cleaning
The water from the hoses is what most people underestimate. A single engine can pour hundreds of gallons into a house in minutes, and that water finds its way into wall cavities, under cabinets and down through ceilings. Mixed with soot and ash, it is dirty water, so wet carpet, pad and insulation are usually removed rather than dried in place. Crews pull baseboards or drill small vent holes to dry wall cavities, and they log moisture readings until the framing is back to a normal dry level.
- Structural drying after the firefighting water
- Electronics sent to a specialist vendor
Just got the all-clear from the fire department?
Call the free line, and a dispatcher will talk you through the next hour while lining up an independent crew close by.
Call +1-833-336-1630What you can expect from a Unify Fire Solutions referral
We can't promise what a fire will cost or how long the rebuild takes. Here is what we can tell you plainly.
Line-item estimates in writing
Before any work begins, the contractor should hand you a written estimate broken out line by line, so ask for it. Many crews in Utah, UT build estimates in the same software adjusters use, so the two documents can be compared side by side.
Dispatch at any hour
The phone is answered 24/7 and dispatch starts the moment you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Independent crews working statewide
Our network covers metro areas, suburbs and small towns throughout Utah, UT. You are matched with a crew that works near you and knows how the local building office and utilities run.
Licensed, insured independent pros
Every referral goes to a licensed and insured independent contractor. Even so, check the license and request a certificate of insurance before you sign, and ask if the crew works to IICRC S700 guidance.
Another contractor if the first isn't right
If the first contractor turns out not to be the right fit, call us again and we'll connect you with someone else. It might be scheduling, a second estimate your adjuster asked for, or just a bad fit in personality. Any of those is a fine reason.
On bigger fire losses, a second estimate is normal, and plenty of adjusters prefer it. Just make sure both contractors are pricing the same scope, item for item, so you are comparing like with like.
Your statewide fire recovery decision guide
Every fire is different, but the order of decisions is surprisingly consistent anywhere in Utah, UT. Use this as a checklist while you wait for a crew.
- 1
Safety first, then the call
Stay out until the fire department tells you it's safe to return. Then call +1-833-336-1630. A dispatcher will ask about the scene, the water, and any open roof or windows, and will start looking for a crew right away.
- 2
Arrival and site security
The contractor walks the property with you, documents it in photos, and boards or tarps openings. If water is standing, extraction often starts on the first visit.
- 3
Scope of work in writing
You get a written, line-item estimate that separates emergency mitigation from repairs. It goes to your adjuster, and only emergency stabilization should proceed before you sign.
- 4
Cleaning, drying and deodorizing
The crew tears out burned materials, dries the building, cleans soot from each surface, and deals with the odor. Moisture readings and photos are logged daily so the adjuster can see the progress.
- 5
Rebuild and final walkthrough
Permitted repairs follow, from framing and electrical to drywall, paint and flooring. Before the final invoice, walk the property with the contractor and make a punch list of anything left undone.
The first hour, before any crew arrives: make sure every person and pet is out and accounted for. Wait for the fire department to release the scene before going back in, and leave the breaker panel alone. Write down the incident number the firefighters give you; your insurer will ask for it. If it's safe from outside, shoot wide photos and video of every side of the building.
Fire department release and red-tagged properties
Until the fire department formally hands the property back, it's their scene. When investigators are still determining the cause, you could be kept out for several hours or, now and then, a few days.
After release, a local building official may post a placard on the door. Green usually means occupancy is allowed, yellow means restricted entry, and red means no one enters until an engineer or official evaluates it. Placard systems vary by jurisdiction across Utah, UT, so read the notice carefully and call the number printed on it.
A red tag doesn't block exterior mitigation. Crews can still board, tarp and fence, and many work with a structural engineer to get the red tag lifted.
Utility shutoffs after a fire
During the fire, crews often pull the electric meter and shut the gas. Once a utility has been shut off for a fire, the provider usually will not restore service until the system is inspected, and sometimes a licensed electrician or plumber must sign off first.
For that reason, restoration crews usually arrive with generators to power the scrubbers and dehumidifiers. Call your electric, gas and water providers yourself to report the fire and ask what they need to restore service.
If water service is still live and a line ruptured in the heat, close the main shutoff. It is usually near the meter or where the line enters the house.
Working with your insurance adjuster
Report the loss to your insurer the same day and get a claim number. Most policies require you to take reasonable steps to prevent further damage, which is exactly what emergency mitigation is. You do not need to wait for the adjuster before boarding, tarping and drying, but keep every receipt.
Independent contractors across Utah, UT usually produce two separate invoices: one for mitigation (board-up, extraction, drying, soot cleanup) and one for restoration (rebuilding). Adjusters handle the two differently, so separating them keeps the claim moving. Ask for dated photos, daily moisture logs, and a contents inventory, and request copies of everything sent to the insurer.
When the home can't be lived in, many policies cover additional living expenses, also called loss of use, for things like a hotel and meals. Limits vary from policy to policy, so ask your agent what applies and keep all receipts.
Building permits for fire repairs
Cleaning and mitigation usually don't need a permit. Structural repair, electrical rewiring, new framing, roof replacement and HVAC replacement almost always do. In Utah, UT, local city and county building departments issue permits, which means forms, fees and inspection timing differ by location.
An experienced local contractor will know the nearby office and will typically pull the permit under their own license. Make sure the permit is posted on site and that inspections are signed off before walls are closed up. Your insurer may ask for the final inspection record before releasing the last payment.
Older homes can raise extra questions once walls are open. If the building is old enough to contain asbestos in drywall texture, flooring or duct wrap, or lead in the paint, testing may be required before demolition. The repairs might also need to meet today's code instead of the original one, and some policies cover that under ordinance or law coverage, so ask your agent.
Landlord and tenant responsibilities
With a rental property, the structure and the renter's belongings typically fall under different policies. Usually the owner's policy covers the building and fixtures, and the renter's policy covers the tenant's furniture, clothes and temporary housing.
Owners should put access, timelines and habitability decisions in writing for tenants. Renters should take their own photos before pack-out and request a copy of the contents list. Rules for both sides come from Utah, UT law and the lease, so review the lease and contact a local housing office or attorney with questions.
Either party can call the line. In most cases the owner signs for the building work and the tenant handles the contents claim, and one crew can do both if everyone agrees.
Getting a small business back open
For a business, every closed day costs money, so speed of mitigation matters even more. Ask your commercial carrier about business interruption coverage and track lost income starting on day one.
Food service, salons, clinics and grocers usually need a health or fire inspection before they can reopen. Ask the contractor for a phased schedule and a written list of what must be finished before each inspection.
Back up the point-of-sale system, payroll records and customer files before anyone moves the computers. Then tell your landlord, if you lease the space, because the lease usually spells out who pays for which repairs.
Why 24 to 72 hours is the window: soot keeps etching surfaces, wet materials start to grow mold, and odor soaks deeper into porous materials every day it sits. Starting mitigation quickly is usually the single biggest factor in how much of your home can be cleaned rather than replaced.
Notes from people who called the line
Shared with permission. Names shortened for privacy.
Our dryer vent caught fire late at night, and when the firefighters finally cleared us I couldn't think at all. The dispatcher asked me five or six simple questions and told me to get the incident number before the engine left. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I own two rental duplexes and one tenant had a kitchen fire. The best part was that the contractor split the mitigation bill from the rebuild estimate. The adjuster signed off on the first invoice in a week, and the neighboring tenant stayed put because the crew sealed off the shared wall and attic.
We rented our place and the fire started in the unit below us. I didn't know my renter's policy would pay for a hotel until the dispatcher suggested I ask my agent. The crew packed out our clothes and the kids' things and gave me a typed inventory, which made the claim a lot easier.
My restaurant went dark on a Friday after a grease fire. The contractor set up plastic walls so we could get the dining room cleaned and inspected while they kept working on the kitchen. They gave me a written list of what had to be done before the health inspection, and we passed the first time.
The first company I was sent couldn't start for almost a week. I called back, said that wouldn't work, and the dispatcher connected me with a different crew who started the next day. No argument, no hassle. That is all I wanted.
Common questions from callers in Utah, UT
How fast can a Fire Damage Cleanup technician arrive in Utah, UT?
We begin dispatching as soon as you call, and someone answers at any hour. How soon a crew arrives depends on which independent contractors are available and how far they are from your property. Across much of Utah, UT it is often the same day, and the dispatcher will give you a realistic picture before the call ends.
Do you provide upfront pricing?
Unify Fire Solutions doesn't set prices, because we don't do the work. The independent crew writes a line-item estimate before work begins, and you should have it in hand before you sign. Emergency board-up or extraction may start immediately to limit damage, so ask the crew to put those charges in writing as well.
What emergency services are available?
The crews we refer usually cover board-up, tarping, extraction of firefighting water, drying, soot removal, air scrubbing and deodorization. Many also offer contents pack-out and storage, HVAC and duct cleaning, and full rebuilding after the cleanup. Tell the dispatcher what you're seeing and we'll match you with a crew that does that work.
Do contractors in UT work directly with my insurance company?
Most independent contractors in UT are used to working alongside insurance adjusters. They build a file with photos, moisture logs and a line-item estimate, and with your OK they'll send it to the adjuster. Keep in mind the policy is between you and your insurer, so you make the final decisions and should keep copies of everything.
Do I need a permit for fire damage repairs in Utah, UT?
Cleaning and mitigation usually don't, but structural, electrical, roofing and HVAC repairs almost always do. Your city or county building department issues permits in Utah, UT, and the rules differ from place to place. A local contractor will usually pull the permit and schedule inspections for you.
Can I stay in my house after a fire?
It depends on the fire department's release, any building placard, and whether utilities can be safely turned back on. Even after a minor fire, soot and odor can make the home unhealthy to sleep in, particularly for children, older adults and people with asthma. Ask your insurer whether your policy includes additional living expenses for temporary housing.
Should I call my insurance company or a contractor first?
Call both on the same day, in whatever order works. Your policy almost certainly requires you to prevent further damage, so you don't have to wait for the adjuster before boarding up or removing water. Write down the claim number, save all receipts, and pass the number to the contractor so their documents line up.
What should I throw away after a fire?
Throw out food, medicine and cosmetics that were exposed to heat, smoke or firefighting water. Photograph and list everything else before discarding it, and let the crew help sort what can be saved. Many items that look ruined, like clothes, dishes and hard furniture, can often be cleaned.
Is it safe to clean up soot myself?
Wiping soot with a wet rag usually smears it deeper into paint and fabric, and some residue contains acids and fine particles you don't want to breathe. If you must go in for essentials, wear gloves and an N95 mask, and keep fans and the HVAC off. Let the crew handle cleanup, since they'll test the residue and pick the correct products.
Does Unify Fire Solutions serve every part of Utah, UT?
Our network reaches cities, suburbs and rural communities throughout Utah, UT. In remote areas the nearest crew may be farther away, so the dispatcher will be upfront about expected timing. Call +1-833-336-1630 with your address and we'll tell you who can get there.
Fire Damage Cleanup coverage throughout Utah, UT
A single number connects you with independent crews anywhere in Utah, UT, from crowded metro blocks to farmhouses on long rural roads.
In metro areas, there are usually several contractors within reach, so the dispatcher can match on specialty, like commercial kitchens or high-rise condos. Suburban crews see plenty of attached garage fires, dryer vent fires and kitchen fires in single-family houses. In rural parts of Utah, UT, the nearest crew may travel farther, and they often arrive with generators and trailers because utility restoration can take longer.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Callers tell us about kitchen fires, clogged dryer vents, space heaters, wiring faults, candles, lightning, grills, garage fires, furnace puff-backs and fires that spread from next door. Whatever the cause, the first call is the same.
If you are out of state when it happens, say at a rental property or a parent's home, you can still call. The dispatcher can coordinate with a neighbor, a tenant or a property manager on site, and the contractor can send photos and the written estimate to you by email before anything beyond emergency stabilization begins.
